s'ko Posted June 9, 2004 Share Posted June 9, 2004 HEre is the problem. I had a CEL from cleaning my car. Went to Autozone to get the OBD II code and it ends up being a loose fuel cap. I turn the engine on and the CEL goes out. . I go to pull out of Autozone. Look left, look right and then I look at my dash and I realize that my RPM is dead. I turn the engine off and turn the key on and NOTHING is lit. No oil light, no air bag light, no brake light, nada. Drive home and I don't have speedo and turn light either. Pull home and pull the fuse box. There are no fuses marked dashboard Hazard lights, high beam and door lights work. Dash illumination bulbs work, From what I gather fuel gauge also works. Temp gauge I am not sure of since I didn't run it long enough to get it hot. Anyone have this happen to them and what is the likely cause of it? I really need the help b/c I have to SMOG the car soon and I wont pass if my CEL doesnt gome come on. Thanks BW Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now