Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

No start after turbo gasket replacement, no spark.

Featured Replies

Hey guys, 1989 gl wagon turbo,

 

I just replaced my turbo mounting gaskets and (pita) coolant hoses. Now, it won't start, though it ran great right before. I could faintly smell fuel, though I'm not ruling fuel problems out completely. It did sit for about 3 weeks. I'm not getting spark, nothing to the dist, and nothing to the coil. I do have power in and out of the 4 fuses next to the battery.

 

Where do you estimate I'm losing power from the fuses to the coil (bad coil?)? Is it an ignition switch? Some solenoid? Any ideas on what to check for would be appreciated!

Try another distributor, another coil.  Check the brittleness and thus the lack of conductivity of two wires.  The first wire is the engine ground wire where it connects to the body in front of the battery.  The second is the black wire coming off of the + battery terminal, that goes into the bottom of the fusible link box.  The critical end is at the battery end of that black wire.  You may have also disconnected some main electrical harnesses and forgot to reconnect them around the air intake box.

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.