SubaruRichie Posted August 1, 2004 Share Posted August 1, 2004 Ok, I was at the wrecking yard yesterday and I found a set of pugs still on the car. Good shape too! I was wondering if they would fit on my 78 brat. I am asking this because I tried to put some stock steel rims off my 88 XT that I junked on it. The back wheels did not have the clearance to roll. So I was wondering if the pugs would work or would I have to modify something on my brat to make them work. Link to comment Share on other sites More sharing options...
bajavwnsoobnut Posted August 1, 2004 Share Posted August 1, 2004 well the 14 inch steel pugs that I handed over to Richierich had no problems fitting on cause I found that out too the hard way while I was putting on rims on my 76 for rallyX that were gen 3 wagon wheels and then tried the alloys too with no luck but yeah if need be just get one and make sure there is a return policy and just test fit it and see if the backspacing is correct Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now