Ok, I was at the wrecking yard yesterday and I found a set of pugs still on the car. Good shape too! I was wondering if they would fit on my 78 brat. I am asking this because I tried to put some stock steel rims off my 88 XT that I junked on it. The back wheels did not have the clearance to roll. So I was wondering if the pugs would work or would I have to modify something on my brat to make them work.

well the 14 inch steel pugs that I handed over to Richierich had no problems fitting on cause I found that out too the hard way while I was putting on rims on my 76 for rallyX that were gen 3 wagon wheels and then tried the alloys too with no luck but yeah if need be just get one and make sure there is a return policy and just test fit it and see if the backspacing is correct