BRAT WGN Posted November 6 Share Posted November 6 I need help finding the two gaskets that fit on the throttle body insulator/spacer. Its for an 1983 EA81 HITACHI dcp306-21. The rebut kits come with the spacers but not the gaskets. Any help would be appreciated. Link to comment Share on other sites More sharing options...
bushytails Posted November 7 Share Posted November 7 Gasket-in-a-tube might be fine... Link to comment Share on other sites More sharing options...
SuspiciousPizza Posted November 7 Share Posted November 7 You could get some gasket material and trace the spacer to cut out your own gaskets. You could also use the tube. I'm not familiar with the 2nd gens as much so I'm not sure if they're a paper gasket or a metal graphite composite. I might actually have some gaskets at home, I'll have to check. I have an EA81 sitting around for something someday and it came with a full gasket set. I'd be converting it to TBI anyways so I don't need the carb gaskets. I'll message back here later today or tomorrow and let you know. :] Link to comment Share on other sites More sharing options...
SuspiciousPizza Posted November 8 Share Posted November 8 No go on the gaskets. They weren't in my gasket collection. Is there no results when you search the P/N? Link to comment Share on other sites More sharing options...
88SubGL Posted November 8 Share Posted November 8 You can use a cereal box to make those gaskets. Done it many times with no problems. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now