there seems to be a lot of chatter on the marketplace about people wanting various sizes of peugeot wheels. how hard would it be to get a manufacturer to make small run of 140x4 wheels, in say, 14"-16" sizes?

 

personally, i dont want anything fancy, just something larger (15" or 16") and lighter that i can run on the street with more grip.

bump!

Sumit will do custom rims. Might find some manufacture that can sell 'blanks' that have no bolt pattern drilled. Then you could just drill them out yourself. There are also 'blank' centers from farm suppliers. Cut out a center of a rim, drill desired patern in blank center, weld in the blank and you now have custom rims.

 

I've looked into this a little bit over the web. That's about all I've found. Didn't dig too deep cuz it seemed like just as much work as redrilling hubs to 6x5.5", converting to XT6 5lug, or redrilling 6x5.5" rims to 4x5.5". 5.5" is pretty darn close to 140mm... isnt it 139.7mm ?