Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

99 Legacy Factory Stereo Problem

Featured Replies

So, the green backlight is working on the stereo.

But nothing else is. No eject, no clock, no nothing.

Ive checked whatever fuses under the hood and under the steering wheel that corespond with the radio according to the manual and they seemed to be fine.

Does anyone have any suggestions? Has this happened before. I didnt witness it, but apparently it happened all of a sudden.

any help would be great..

cheers

nate

Definately the radio is not getting any power, and that's where to start your search. Assuming its a factory installed radio, it may be that the wiring harness to the radio is partially disconnected or corroded. Its easy enough to pull the radio and check/wiggle the plug to see if that makes a difference. Also, some radios have a fuse built into them. If yours has one, it may be blown, or your fuse in the fuse panel may be bad, even though you've checked it visually. Try replacing it with a known good one. When you pull the radio and disconnect the wiring harness, use a test light to see if there is power there at the connector, usually the red wire or the orange one. Good luck.

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.