tracedog67 Posted February 14, 2005 Share Posted February 14, 2005 Fellers, Bought a new bulb for my headlights but I couldn't get the old one out of the light assembly. What the heck am I doing wrong? There is a rubber "boot" over the hardware that holds the bulb but i can't get it out of the assembly. There are 2 arrows in the center that says to push but the darn thing wouldn't come out. Someone straighten me out so i don't feel so stupid. thanks Tdog Link to comment Share on other sites More sharing options...
Gnuman Posted February 14, 2005 Share Posted February 14, 2005 Fellers, Bought a new bulb for my headlights but I couldn't get the old one out of the light assembly. What the heck am I doing wrong? There is a rubber "boot" over the hardware that holds the bulb but i can't get it out of the assembly. There are 2 arrows in the center that says to push but the darn thing wouldn't come out. Someone straighten me out so i don't feel so stupid. thanks Tdog Under the "boot" there is a plastic ring that goes around the back of the bulb, and holds it into the headlamp housing, If I Recall Correctly. . . Link to comment Share on other sites More sharing options...
timn29 Posted February 14, 2005 Share Posted February 14, 2005 If you hadn't made it this far: -Unplug the power wires from the rear of the plastic bulb assembly by squeezing the clips attached to the plug. -there is a metal clip you need to push DOWN to unclip the plastic bulb assembly. -turn CCW 1/4 and pull straight out Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now