April 25, 200520 yr Is there anything special i should do to get the water out of my engine? I'm going to drain it out and put some new oil in tomorrow. I can't get seafoam here, but will this be enough of should i consider additives or do something special? Someone put water down the dipstick... Thanks in advance.
April 25, 200520 yr Drain the oil and put fresh oil in. Drive it around for an hour or two and that will evaporate the rest out. If you didn't drive it around the water should only be in the pan.
April 25, 200520 yr Author If you didn't drive it around the water should only be in the pan.Too late for that, but i haven't driven it too far... and i won't be until it gets changed.
April 25, 200520 yr Try some Marvel Mystry Oil along with the new oil. (8oz). That will help chase the water out of the lifters and bearings. You should be OK after that.
April 25, 200520 yr Author Try some Marvel Mystry Oil along with the new oil. (8oz). That will help chase the water out of the lifters and bearings. You should be OK after that.Ok, thanks for your help. I'll see what i can chase up. I might do a couple of oil changes and see if i can get that additive.
April 25, 200520 yr Author Ummm, okay. How did that happen?I had the pressure cleaner to it to clean it up. I made sure the electrics didn't get wet... but didn't protect the dipstick.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now