May 22, 200520 yr Well I finally got the alarm system installed and working, I've done a few in the past but I learned that the GL is unique to all other installs I have done in the past in more ways than one Features I installed are : Remote Start Hood Pin Trunk Pin Dome Light Illumination Battery Backup Siren Starter Kill Dual Zone Shock Sensor As you can see it was a wiring mess of connections, but in the end it turned out ok, I have a few more small things to address. I have a few questions regarding interfacing the power door locks into the alarm. After inspecting the power door lock system it seems that I will need to purchase an aftermarket door lock actuator in order to interface the power door locks to my alarm system so I can lock and unlock the doors upon disarm/arming the system? Is this correct, or is there an easier way? Also I need to know if anymore knows where to tap into the door trigger wire. I tried soldering a wire on the drivers side door trigger in the door jam but it only sounds the alarm if that door is opened, not any of the others Also if anyone has any questions about the remote start part of it I would be glad to help out in other people's installs.
May 22, 200520 yr Also I need to know if anymore knows where to tap into the door trigger wire. I tried soldering a wire on the drivers side door trigger in the door jam but it only sounds the alarm if that door is opened, not any of the others I used the wire that turns the inside light on when a door is opened.
May 22, 200520 yr Author I used the wire that turns the inside light on when a door is opened. where is this wire located and what color is it if you remember?
May 22, 200520 yr where is this wire located and what color is it if you remember? I did it on an ea81, so it will be different. My wiring diagram for an 87 shows a switched earth wire coming out of the instrument cluster. Its colour is Black/Red. It then has a connector (no idea where) where it changes to Black, this runs all the way to the light.
May 22, 200520 yr Author I did it on an ea81, so it will be different. My wiring diagram for an 87 shows a switched earth wire coming out of the instrument cluster. Its colour is Black/Red. It then has a connector (no idea where) where it changes to Black, this runs all the way to the light. Ok thanks for the info, I'll check it out tomarrow.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now