When it gets cold (used to be just winter cold, now its even cool mornings in the summer!), the drivers side shoulder belt won't come up. After driving awhile it comes up like its supposed to. Every once in awhile a real hard door slam will activate it. I figure its a bad connector or relay somewhere, but don't know where to look. The microswitches in the belt channel both seem to be fine.

 

Thanks,

Scott

I'm assuming you have a 90-94 legacy.

 

Here's the diagnostic procedure to pull codes from the computer. It may be of use

http://www.main.experiencetherave.com:8080/subaru_manual_scans/FSM_Scans/autoseatbeltdiag1.jpg

http://www.main.experiencetherave.com:8080/subaru_manual_scans/FSM_Scans/autoseatbeltdiag2.jpg

http://www.main.experiencetherave.com:8080/subaru_manual_scans/FSM_Scans/autoseatbeltdiag3.jpg

Thanks Josh ... I hope this helps me figure it out.

welcome