omniman69 Posted November 2, 2005 Share Posted November 2, 2005 good morn. i am having trouble with my 86 xt turbo, i just changed the starter, and now it cranks but won't fire, i can't hear the fuel pump energize. is there a way to check it?, any help would be greatly appreciated mike Quote Link to comment Share on other sites More sharing options...
Cougar Posted November 2, 2005 Share Posted November 2, 2005 There should be some test connectors that you can tie together and they should make the pump run. They are usually green, or white. Not sure for your model. You can also tie a jumper lead to it and provide 12 volts directly to it for a test. If you don't have spark to the plugs that will make the ECU shut down the pump. The ECU needs to see the proper signals to fire the ignition. Be sure to check all the fuses and possibly fuse #5 powers the control circuit like the other models. Quote Link to comment Share on other sites More sharing options...
omniman69 Posted November 3, 2005 Author Share Posted November 3, 2005 got it started, turns out i am just and idiot and didn't reconnect the coil wire after installing the new starter(d'oh), so i had to hold the go pedal to the floor to get it started, took bout 20 seconds to get started, but it idles nice, but now it runs really hot, i took the thermostat out to try and remidy this, but it still runs hot. any ideas to this one? mike Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.