After having my Legacy in for some fender work, my keyless entry system isn't working like it used to. The transmitter are locking and unlocking the doors like they should however, the parking lights/dash lights/tailights are not flashing with the locking and unlocking of my car anymore. The repair shop told me they did have my battery disconnected for a long period of time and didn't recall seeing the lights flashing when the battery was connected again. Please help me out. It's not an emergency but it is an annoyance and all the dealerships I've called don't know what the heck to do.

http://www.cars101.com/subaru/keyless.html#code%20alarm

 

Try the above link and search for details on your model. Is there anything in your owner's manual that cover the various options with the remote i.e. turn off the horn beep etc.?

I found that site already and tried pressing the reset button connected to the keyless entry module for 1 second with the keys in the ON position, but it didn't change anything... if it helps, the PN of the module is #H7110AS011 and I DO only have the keyless entry system... no added security kit or anything. Before the repair shop had my car I remember with disconnecting the battery for like an hour while installing my fog lights my parking lights and such flashed repeatedly when I reconnected the battery (as they should) and stopping flashing when I hit unlock on my remote. Now, when I disconnect and reconnect the battery, nothing happens. One subaru dealership said something about valet mode and a red led switch somewhere but I don't know where or what color wires it is attached to... any help would be greatly appreciated!

Update: After retracing my steps as to the last time I was messing around under my dash (installing my fog lights), I pulled too hard on the vampire clipped wire that makes the parking lights flash. All is well now! Thanks.