ganjagti Posted January 17, 2006 Share Posted January 17, 2006 I will be doing the clutch on my car this week, and i need to know the specs for installing it. I need the torque specs so if anyone can help me out, i would greatly appriciate it. Link to comment Share on other sites More sharing options...
Legacy777 Posted January 17, 2006 Share Posted January 17, 2006 You'll need to give us a little more info about your car before we can provide any further information. Link to comment Share on other sites More sharing options...
ganjagti Posted January 21, 2006 Author Share Posted January 21, 2006 it's a '97 legacy awd wagon w/ a 2.2...anything else u need to know? Link to comment Share on other sites More sharing options...
Legacy777 Posted January 22, 2006 Share Posted January 22, 2006 I don't know the specific torque specs. Just don't overtighten the pressure plate bolts. Other then that, every thing else is pretty straight forward if you've done a clutch job before. Link to comment Share on other sites More sharing options...
eventoday Posted January 22, 2006 Share Posted January 22, 2006 i just did my clutch on my 97 subaru outback. its a 2.5l but i used a haynes manual and if i remember the flywheel was 65 ft lbs and the clutch plate was 132 IN lbs. so dived that by 12 if you don't have an inch lb torque wrench. they may be different on a 2.2 but i can't imagine that much.. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now