EA82 rear diff spacer for AA lifted rigs

[torxxx]

Well after looking at numbchuxs posts about the diff spacer he got and then looking at SRJlift.com, I decided that my lifted rig needed one on the diff bracket. I used 1 1/2" square tubing. took about 20 minutes to get the holes drilled big enough (using my lil dewalt drill bit kit.)

 

Primed the spacers up used 5 1/2 inch long M12's I believe. They are the same size as the stock bolts, just coarse thread.

 

Cost me about 15 bucks to make the stuff and 10 min to install.

I'll try to get some pics of it up this weekend.

 

I reccomend this mod for ANYONE who has a AA high clearance lift on their rigs. 1 1/2 will make your rear diff sit completely level instead of having the front up a inch or two higher than the rear.

 

It seemed to take a lil bit of bind out of the driveshaft. MY VLSD seems to lock up quicker. My rear diff no longer slams on the bottom of the body when I accel hard in 4wd.