sc850r Posted July 18, 2006 Share Posted July 18, 2006 The passenger side intake gasket on my 95 legacy GT failed after only 5K miles. When I took the manifold off the gasket looked squashed and had cracked in several places. Did I over torque the manifold? What is the correct torque? Do people use sealant or not? Suggestions? Thanks! Link to comment Share on other sites More sharing options...
ccrinc Posted July 18, 2006 Share Posted July 18, 2006 No sealant. Clean both surfaces thoroughly. About 15 ft. lbs. MAX. Emily http://www.ccrengines.com Link to comment Share on other sites More sharing options...
Setright Posted July 18, 2006 Share Posted July 18, 2006 Sounds right. Overtorquing those bolts is all too easy, use a good torque wrench on the new gaskets. Link to comment Share on other sites More sharing options...
sc850r Posted July 18, 2006 Author Share Posted July 18, 2006 Thanks for the info. I guess I won't use the 3/4" impact gun this time and the 3 foot breaker bar is totally out of the question! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now