i feel like moron having to ask for directions, but could someone point me in the right place where i could find a process for doing my front brakes and rotors on my 88 subaru wagon? i know there has to be one around here, but cant seem to find it. thanks.

Engage E-brake

Break loose axel nut.

Jack up car and place on jackstands

Remove wheel

Remove 12mm bolt at lower side of caliper.

Release E-brake

swing caliper upwards and then inwards to remove from upper pin.

Stick caliper under halfshaft.

Remove brake pads.

Undo 17mm caliper bracket bolts

Remove caliper bracket

Undo axel nut

Pull hub and rotor off of axel end

Remove 4 14mm bolts holding rotor to hub

 

Reverse process to assemble.