spokanesoob Posted February 14, 2007 Share Posted February 14, 2007 so got a code 34 check engin light comes on stays on then when car gets to a certian temp point turns off, then 5 min or so comes back already replace silinoide so what to do ? 88 dl spfi Link to comment Share on other sites More sharing options...
azsubaru Posted February 14, 2007 Share Posted February 14, 2007 Replace the solenoid with a 68 ohm (or anywhere around that) resistor and see if the light stays off. If it does, you still have a bad solenoid. If it still comes on, you have either a wiring problem or a bad ECU, most likely a wiring problem. The connector could be your problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now