there's a single blue wire that's not part of the wiring harness (because it's part of the power steering recall) that bolts to the back of the power steering pump. looking from the drivers side of the engine bay you can see the back of the pump. this wire is either connected to the negative terminal at the 5 oclock position or the stud at 3 oclock. both of these positions have other wires connected to them, but this single wire will be exposed and running along the length of the bottom edge of the windshield, not covered or hidden in the harness.

 

anyone with an XT6 want to help me out here?

all it requires is looking under your hood.

If no one checks answers before..I will look when I get home from work and post 4 ya

Not sure if mine actually has one. But there is a blue wire hooked to the posotive that hooks into those seemingly unused plugs in the back of the drivers side engine bay i have a pic, but can't post it here lol, hope this helps gary let me know and i'll check more into it

are you sure it's the "loose" wire that's the lone wire connected into the plug by the drivers side strut tower? it's connected to the "postitive" terminal at the 10 oclock position? that sounds odd, got a picture you can email me?

 

grossgary at the yahoo place.

Emailed you a couple pics.

sweet, that's the wire and thanks for the pic! i still can't see where it's bolted to on the power steering pump. can you verify which stud it's bolted to? are you saying it's the top one with the red wire, it's bolted under the rubber cap?

Yep bolted under the cap at the "5" position.

got it, thanks for the help!