Tosh Posted June 2, 2007 Share Posted June 2, 2007 its the one on the right that goes under the white wire and yellow tape its hooked up to the bottom of my throttle body Link to comment Share on other sites More sharing options...
rllywgn Posted June 2, 2007 Share Posted June 2, 2007 i took a look at mine and uhh.. what is the orientation of this photograph? im assuming this is from your ea82t? Link to comment Share on other sites More sharing options...
Gloyale Posted June 2, 2007 Share Posted June 2, 2007 Did you rotate the throttle body on that spyder intake. That kinda looks like the coolant line to the throttle body. If it's rotated then that is the inlet and the outlet is would now be on the top. Problem is that unless you have the water pipe that goes under the intake from an XT, you have no way to return the coolant. You can leave it unhooked and it will be fine too. Just have to cap the outlet on the manifold . Link to comment Share on other sites More sharing options...
Tosh Posted June 2, 2007 Author Share Posted June 2, 2007 sweeet no I did rotate it but i had to switch it back to the stock orentation (tps didn't clear one of my intercooler pipes) the top one was already capped off thanks thats all I needed to know Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now