starkiller Posted July 25, 2007 Share Posted July 25, 2007 ok, which screw/bolt adjust the up/down position of the headlight? Quote Link to comment Share on other sites More sharing options...
Manarius Posted July 25, 2007 Share Posted July 25, 2007 The screw on top of the headlamp housing. It's a Philips head screw. Quote Link to comment Share on other sites More sharing options...
SubaruFred Posted April 6, 2011 Share Posted April 6, 2011 The screw on top of the headlamp housing. It's a Philips head screw. Wrong. Quote Link to comment Share on other sites More sharing options...
starkiller Posted April 6, 2011 Author Share Posted April 6, 2011 Doesn't make a difference as this was totaled out last year and the thread is 4 years old:lol: Quote Link to comment Share on other sites More sharing options...
bheinen74 Posted April 6, 2011 Share Posted April 6, 2011 its a 8mm end on the adjuster for future help. yeah bump the dead; Quote Link to comment Share on other sites More sharing options...
SubaruFred Posted April 6, 2011 Share Posted April 6, 2011 The reason I bumped this old thread is because I was searching all day for info on adjusting my 93 Legacy headlights and couldn't find what I needed. I finally found a useful, albeit incomplete, thread at Legacy Central. On each lamp housing there are 2 beam angle gauges (hor & ver), two 8mm/#2 phillips adjustment screws and the 5mm allen head screw in the horizontal beam gauge. The outboard 8mm screw adjusts the vertical beam and at this point I'm not sure what the allen screw and inboard 8mm screw adjust. Obviously one or both adjust the horizontal beam angle but I haven't confirmed it or found that info anywhere. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.