Chip Posted September 6, 2007 Share Posted September 6, 2007 The car will start on compression when rolling downhill,(popping the clutch), but won't start normally. The battery is fine..12+ volts. I can't hear a clicking sound coming from the starter when trying to start it either. I was looking at the clutch switch under the dash. Is it supposed to move in and out,(because it doesn't), or is it a proximity switch,(like a magnet) ? Has anyone tried bypassing the switch, (by simply grounding it )? Link to comment Share on other sites More sharing options...
RallyKeith Posted September 6, 2007 Share Posted September 6, 2007 The car will start on compression when rolling downhill,(popping the clutch), but won't start normally. The battery is fine..12+ volts. I can't hear a clicking sound coming from the starter when trying to start it either. I was looking at the clutch switch under the dash. Is it supposed to move in and out,(because it doesn't), or is it a proximity switch,(like a magnet) ? Has anyone tried bypassing the switch, (by simply grounding it )? Don't ground it, simply unplug it a shove a piece of wire between the two contacts. The plug should have the female ends making this easy. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now