March 28, 200818 yr it acts like its stuck shut, will not idle, stalls, after a couple of restarts works again, ive cleaned it and replaced with another one from around the shop still does it any body got any ideas this is the last thing holding the car back its killing me too
March 28, 200818 yr Author Is it a manual trans? nope auto i ordered the switch, its external, i was telling nipper, i wonder if its the same part???
March 28, 200818 yr Author I had one doing that and the intake gaskets were leaking. same code, symptoms??
March 28, 200818 yr I don't recall the code number but it was an idle control code for sure. It would idle really high on startup then surge some, stalled once in a while too. The intake manifold was a little loose. I found it by spraying carb cleaner around the base of the manifold. Did you just have the engine apart on this? You really have to tighten it down good on new gaskets or they don't seal up.
March 29, 200818 yr Author I don't recall the code number but it was an idle control code for sure. It would idle really high on startup then surge some, stalled once in a while too. The intake manifold was a little loose. I found it by spraying carb cleaner around the base of the manifold. Did you just have the engine apart on this? You really have to tighten it down good on new gaskets or they don't seal up. the motor is a freash build, i will check the gaskets in the morning
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now