stumpy Posted July 1, 2008 Share Posted July 1, 2008 Pearl, 90 Legacy LS 218K+ miles My tranny works decent for it's age, AWD works when it wants to. But it will let me know by the lack of lights (Sun roof open and shift indicator lights) or the presence of them. Lights on, AWD is good to go. Lights off, I'm stuck in FWD like the FWD fuse is in. I have found that a sharp rap to the dash will toggle it. So I have a loose connector I presume but not to interested in taking dash apart to fix at this time. Even though there are two other gremlins in there!! (Tack and heater) So, my question is if I install a manual switch to ingage/disingage the AWD will it bypass my gremlin? Quote Link to comment Share on other sites More sharing options...
idosubaru Posted July 1, 2008 Share Posted July 1, 2008 So, my question is if I install a manual switch to ingage/disingage the AWD will it bypass my gremlin?yes, assuming nothing really funky is going on (doubt it). all you need to do is control the duty C circuit (one wire!). Quote Link to comment Share on other sites More sharing options...
mrtoyou7747 Posted July 1, 2008 Share Posted July 1, 2008 Don't forget to place a 10 Amp fuse in that line. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.