EVOthis Posted August 19, 2008 Share Posted August 19, 2008 alrighty...i have a 96 legacy sedan ej22....i turned off my car 2 days ago with the ventilation setting on passangers face.....i turned on my car today and when ever i press any of the other buttons on the control head like defrost or floor or anything the ventilation doesnt change...i have run into this problem before and it turned out that the mode door motor was fried so i replaced it and it worked great...that was about 20,000 miles ago....the AC button works and so does the fan speed...but nothing when i press the vent door buttons (defrost, floor...etc...).....any ideas on what to check here....im used to hearing the mode door motor when i press the buttons but i dont hear anything now.....can the motor fail that quick....ill be poking around a little bit today with it....but i just wanted to see if anyone had any suggestions on what to check....wiring...etc....thanks for your time.... Link to comment Share on other sites More sharing options...
Legacy777 Posted August 19, 2008 Share Posted August 19, 2008 I haven't run into this on the 2nd gen legacies, but it may be similar to the issue I link to here http://www.ultimatesubaru.org/forum/showthread.php?t=91468 Link to comment Share on other sites More sharing options...
EVOthis Posted August 19, 2008 Author Share Posted August 19, 2008 yea i just took a look at that post a few min. ago.....a while ago somebody spilled soda on the control head because the cup holder is right under it i guess....so im thinking i need a control head....i took it out and jiggled the wires around and the mode dooe motor is new..i have power and ground....so off to the junkyard tomarrow i guess..... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now