cobcob Posted September 3, 2008 Share Posted September 3, 2008 How do I remove the vents that run across the dash in my '82 DL Brat? I can't see any screws holding them in place and I'm afraid I'll break the 26 year old plastic if I lever on it too hard. I had mice nesting in the vent tubes at some point and now whenever I switch on the fan all the bedding material blows up against the inside of the vent grille and blocks the airflow Link to comment Share on other sites More sharing options...
Seahag1978 Posted September 3, 2008 Share Posted September 3, 2008 It's tweezer time! Seriously, I wouldn't try taking them out. Put the fan on high and pick it out.... may take a few months for all of it to emerge so you can reach it. If you do try to take it out, and break off the tip, a penny wedged in the end will keep it from falling out Link to comment Share on other sites More sharing options...
cobcob Posted September 3, 2008 Author Share Posted September 3, 2008 LOL. Thanks Seahag, I've been pickin at it with a pair of hemostats but I can see all of it and I really want a quick fix! I'll have at it again over the weekend. Fortunately the mouse is gone now so there shouldn't be any new stuff showing up anytime soon! Link to comment Share on other sites More sharing options...
ruparts Posted September 4, 2008 Share Posted September 4, 2008 hi, The vents are screwed to the dash from the forward side, have to remove the dash to get at the screws. try removing the vent tubes from under the dash, they just slip off and could help. the vent closest to the instruments is made into the instrument surround, the others across are one piece I believe, and put on before the dash goes in the car. I have taken several apart but these are a misery to do, mine are falling apart but i just don't want to go there. How do I remove the vents that run across the dash in my '82 DL Brat? I can't see any screws holding them in place and I'm afraid I'll break the 26 year old plastic if I lever on it too hard. I had mice nesting in the vent tubes at some point and now whenever I switch on the fan all the bedding material blows up against the inside of the vent grille and blocks the airflow Link to comment Share on other sites More sharing options...
cobcob Posted September 4, 2008 Author Share Posted September 4, 2008 Cheers, Sounds like the ol' tweezers are the best option then! Link to comment Share on other sites More sharing options...
P K Posted September 5, 2008 Share Posted September 5, 2008 CAUTION! I believe dried rat/mice feces is hazardous, and can still spread disease. Wear a mask and gloves. r/ PK Link to comment Share on other sites More sharing options...
cobcob Posted September 5, 2008 Author Share Posted September 5, 2008 Maybe I'll spray it down so it's not dried anymore? LOL Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now