Jump to content
Ultimate Subaru Message Board

Rise and Fall in Acceleration. New to Subarus. Help!


Recommended Posts

Having trouble with my 90 Loyale. 1.8 not a turbo. Runs fine for a while then, as I accelerate to 3000 rpm to shift, the rpm drops and I have to slow down for the engine to catch up with itself. Occasionally, in neutral on the 5spd, I can depress the accelerator and the engine will rev to 3000 and drop repeatedly at precise intervals. I just bought this thing two days ago. I changed the fuel filter immediately, filled the tank with premium and a bottle of Gumout water treatment. Still does it. Anyone?

Link to comment
Share on other sites

Is the problem dependent on RPM or throttle position? Does it always happen at 3000 RPM, even when you squash the pedal to the floor? Does it always happen on a certain part of the road? Does it always happen in a certain gear? Right turns only, left turns only, uphill or downhill only?

Need more info! LOL These kind of diagnostics can be tricky...

 

I'd follow the above advise, check your dizzy and cap for wear/ damage. Check your harness connectors for corrosion, etc, check your BATTERY VOLTAGE! Low voltage will play hell with ignition systems..

 

Does it feel like the igniton is stopping, or does it feel like it's running out of gas?

 

88RxTuner

Link to comment
Share on other sites

With fuel injection it could be many things. From the fuel pump to the CTS, TPS, O2 sensor, etc.

 

These should get you started;

http://www.troublecodes.net/Subaru/

 

http://www.autozone.com/addVehicleId,1024904/initialAction,repairGuide/shopping/vehicleSelected.htm

 

Within the Autozone repair guide are the testing procedures for the sensors.

Here's the TPS;

http://www.autozone.com/addVehicleId,1024904/initialAction,repairGuide/shopping/repairGuide.htm?pageId=0900c15280066fb8

Link to comment
Share on other sites

How much, if any rotational play is okay?

 

That I am not sure of. I do know that excessive play will cause problems with car running badly to not at all. Because excessive play will cause the spark to not jump across from the rotor to the cap correctly and at the right time. A haynes manual may have the backlash spec on a distributor. Some others here may have that answer to. Try this thread http://www.ultimatesubaru.org/forum/showthread.php?t=31754&highlight=distributor+backlash. Good luck:)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...