Title says it all,

 

for a '96 OBW

 

My FSM is not complete

 

Thanks!

 

Will-

should be same as 91-94 legacy. I have the service manuals at home, will post TQ specs tonight,

Awesome, thanks!

 

Will-

Bumpity Bump,

 

Would LOVE to button this up tomorrow!

 

Thanks!!!

 

Will-

I just do mine tight with the impact, not like insane, sit there and hammer on it tight,,,,,,,, just enough until the impact seats it good. Then stake it down.

**1990** Legacy FSM says:

82-91 ft-lbs for the 22mm nut on the mainshaft

and

174-188 ft-lbs on the 42mm nut on the pinion shaft.

OK, thanks.

 

Usually a big nut like that, I do as Gloyale suggested and just get it tight. But when I took it off, it was staked but it took almost no effort to get it off so I thought it might be some kind of preload thing. I wonder if it being loose contributed to the bearing failure...