May 17, 200916 yr Thank You Brian....(subarujunkie) for bringing me out the cone washer!! after replacing with all new front end parts i tighten the axle and its causes the rotor to rub the brake pad hanger any ideas? Thanks for your help!!
May 18, 200916 yr Wrong bearing, or no/wrong spacer between the bearings? How hard of a rub is it, is it just touching or is it digging in deep?
May 18, 200916 yr Just a basic question, but are you sure it is not the slight, but normal brake pad drag? What I mean is that the brake rotor does not rotate freely, but touches the pads slightly. Welder may be spot on with the spacer point as well.
May 19, 200916 yr It could have something to do with Brian . After we did the rear discs on my hatch, it was dragging pretty gnar. Was the pads. A hundred miles or so it went away.
May 20, 200916 yr Author well after looking at my other brat i notice that the new rotors are 1/8" thicker....grrrrr:mad: this is causing the rotor to hit the brake pad hanger and stops the rotor from spinning anyone have this issue or seen this problem with the older gens?
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now