June 1, 200916 yr I think the missing pieces in my cruise control (98 Impreza) are just the switches on the clutch and brake pedals. Can I bypass these just by shorting out the contacts? The connector for the brake pedal has 4 pins. Does anyone know which pins are for the cruise control?
June 1, 200916 yr You could probably bypass the clutch, but I definitely wouldn't bypass the brake. There's a diagram at the bottom of this pdf which may help. http://main.experiencetherave.com/subaru_manual_scans/FSM_Scans/1997_Impreza_Cruise_add-on.pdf
June 1, 200916 yr Author I'm actually be more worried about bypassing the clutch, but I'd like to at least see if the system is working. If I step on the clutch pedal while the CC is on, there will be no load and the engine will rev up. If I step on the brake, then the CC will simply fight the braking action until I remember to turn it off.
June 1, 200916 yr [...]If I step on the brake, then the CC will simply fight the braking action until I remember to turn it off. Your profile says ''New York'' for the state -- please let me know if it's anywhere near Ithaca, so that I can stay off the roads until you get around to installing the switch.
June 1, 200916 yr Author Your profile says ''New York'' for the state -- please let me know if it's anywhere near Ithaca, so that I can stay off the roads until you get around to installing the switch. You mean get around to finding the switch
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now