Anyone found seats that will bolt right in to an ea81? I've heard that maybe XT6 seats. If I have to make rail adapters that's ok.....what seats will fit ok as far as total height?

Just about anything will fit with modification. I generally use EA82 or Legacy seats when I convert. Nothing out there is a straight bolt-in.

 

If you are looking for more height (lower seat), the best I've found is from an 80's Isuzu Impulse. 3 of the 4 holes for the EA81 rails line up on them. That's about as close to bolt-in as you are going to get.

 

EA82 seats are easy to adapt - you make 4 tabs to weld to the seat frame to offset the rails inward by 1.5" IIRC. I just wrap the seat in wet rags and weld the tabs on - bolt on the rails and bolt them into the car. Takes about an hour.

 

GD