tomson1355 Posted September 9, 2009 Share Posted September 9, 2009 99 Forester. 76K. 5-speed. New to me. Runs well, but blows blue smoke on hard acceleration. Compression is all at 152 lbs. +/- 2 lbs. I tested two cylinders wet and they jumped up to 182. So it looks like it needs rings, right? I've done three HG jobs on phase ones, but never rings. Is it as easy as taking off the oil pan, unbolting the rods, pushing the pistons out and slipping new rings on, or am I dreaming? Will I have to mic bearings and journals and such? the engine runs nice and quiet. I'm stuck with the car which is very nice in other respects. I haven't priced engines yet locally. And I don't want to put a 2.2 in. Other than that, I'm open to suggestions and ideas. As always, thanks. Tom Quote Link to comment Share on other sites More sharing options...
ericem Posted September 9, 2009 Share Posted September 9, 2009 lol gets so old, but have you replaced/checked the pcv valve? Quote Link to comment Share on other sites More sharing options...
tomson1355 Posted September 9, 2009 Author Share Posted September 9, 2009 Checked it. Clicks when shaken. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.