I have a d/r tranny that i used to mock up my (falied) motorcycle engine conversion. I cut off the small extrusion that the pilot bearing rides on in the flywheel. So now i have a d/r tranny with no pilor bearing nipple. Its pretty much worthless right?

If you would be willing to part it out, I could make it worth your while to send me the input shaft with the low range gears on it....

 

-Bill

Even with the input shaft hacked 3/8 of an inch?

I have a d/r tranny that i used to mock up my (falied) motorcycle engine conversion. I cut off the small extrusion that the pilot bearing rides on in the flywheel. So now i have a d/r tranny with no pilor bearing nipple. Its pretty much worthless right?

 

find a bad one one made one good one out of it, I have 2 bad dual ranges in WA

What Scott said.

If the rest of it is good and you find someone who needs the rest or part of the rest of it, it can still be a good parts donor.

Yeah I just need the low gears, Im not actually going to use the shaft itself, but if I felt so inclined I could fix it and use it.... But I just want the 1.59 low gears to swap into a different tranny....

 

-Bill