I've taken over this project http://www.ultimates...n-build-thread/ .
Nobelsablepuma had stopped at the electrical stage and I've been struggling with it since. It came with a harness from generaldisorder (who has been very helpful) and is hooked up direct and minimally for testing.
Connected now are the 3 main engine electrical connectors, MAF, fuel pump, start signal, grounds and power (30amp and 15amp power direct to battery for testing).
It has fuel pressure at the inlet and power at the injectors.
It has spark.
Checked and reset timing (it was almost perfectly set already).
Fuel pump and ignition relays are doing their jobs.
OBD only throws 2 codes - fuel temp and fuel level - which should not prevent it from starting and after repeatedly scanning and turning it over to try to make it throw a code, there's no change.
My head hurts from hitting it against the wall .
Anyone have any tips for other things to check? Any ideas/help would be very appreciated!