Welcome to Ultimate Subaru Message Board, my lurker friend!
|Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created.
We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning
** Not an actual guarantee, but seriously, you probably won't regret it!
Serving the Subaru Community since May 18th, 1998!
MPFI N/A with D/R RX diff lock into DL
Posted 07 March 2005 - 05:44 PM
The theory is now to put them both into the 88 wagon, but with one twist, I'm gonna see how well the T-Case swaps with the NA dual range so that i can keep my low range of 1.59 but have the AWD around town. and a center diff lock when i need it, the beauty of this is that the DL already comes wired for the Center diff, which in that application was open or locked, not awd and locked.
The rub is that its a 3.7 and thats not so good for the offroading, so i'm gonna see if i can put the diff lock on the NA D/R which would be teh hotness. i'll let ya'll know about the wiring once i figure it out. it should be cut and paste.
Posted 07 March 2005 - 08:23 PM
You should be able to get the 1.59 low range ratio that you want, but not the way you think it's done. The low range gear set is located in the front of the transmission on the input shaft. You should be able to swap the gear set with one from the N/A D/R.
The bad news is that the output shaft for the fulltime 4wd transmission is machined dfferently then the N/A 4wd because of how the center diff works.
Posted 07 March 2005 - 11:16 PM
Posted 10 March 2005 - 05:34 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users