doctor Posted January 27, 2004 Share Posted January 27, 2004 Does anyone know where the fuel pump relay is located on an 86 XT Turbo 5 speed 4WD? The fuel pump only gets voltage (12V) when the starter is engaged. Also, do you know if the coolant temperture switch is suppose to have voltage going to it? The Haynes Manual says its suppose to have voltage to it, but mine shows none and the restistance is open. I tried to trace the wires back to the computer, but cannot find where they connect to the computer. Thanks, for any assistance! Quote Link to comment Share on other sites More sharing options...
Partsman Posted January 28, 2004 Share Posted January 28, 2004 My NAPA computer says the FP relay is "behind the instrument panel." Man, that sure narrows it down! Sorry I can't help more! Quote Link to comment Share on other sites More sharing options...
torxxx Posted January 28, 2004 Share Posted January 28, 2004 fuel pump relay..... turbo'd? not sure on this, but check under the back drivers seat... or maybe do a search on it.. For some reason that sticks in my head.. maybe its some other brand of car Quote Link to comment Share on other sites More sharing options...
MilesFox Posted January 28, 2004 Share Posted January 28, 2004 the fuel pump will cycle on for a few seconds when you turn the car on. then, from there, it takes a pulse signal from the distributor to keep it on, hence having voltage when cranking i would say the pump circuit is fine, look more into the thermo switch as a culprit Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.