Leaderboard

The plug is cut off. I thought this fan was off my Brat. Might not have been. I salvaged some parts off an EA81 station wagon many years ago. If you don't mind splicing your plug on I do have the fan. I will check it with my 12v jump pack to make sure it runs and has no issues. Yes, fan works!

I use aftermarket a 10" and a 12" toghether on an Stock EA81 radiator cooling the EJ22 in my wheeler. If you buy 2 good quality aftermarket fans, it will work fine. $40-65 each...........from Napa, not $10 ebay fans. But DO NOT use the stupid pull through mounting plastic tabs. These put the fan right against the radiator and vibrations will cause the fan to rub intot he soft brass radiator and make a hole. Or they will break, because they are cheap plastic tabs. take time to build a metal frame that bolts into the OE mounting holes. 1/4" bolt heads slip nicely into the mounting slots. Those bolts can then either be welded or threaded into a piece of angle iron top and bottom. then that angle bolted to the radiator face's OE holes.

All USDM EJ cars the fan is controlled by the ECU. Old EA cars have an actual thermoswitch