egladman

What about one of these?http://store.summitracing.com/default.asp?target=egnsearch.asp&N=400122+310468&autoview=sku Also how would I hook up the reference point for the turbocharger so it will increase pressure under boost?

Where's the cheapest place to get an adjustable fuel pressure regulator?

I'm currently working on the exhaust for this car and the intake will soon be built also. As for the intercooler i'm probably gonna wait until spring since the budget is kinda short at the moment. I'm not worried about problems overboosting at the moment. It's not like I keep my foot shoved to the floor all the time anyways.

Car recently was tuned up with new cap, rotor, plugs. Fuel filter is new. The problem is the car runs awesome once the turbo kicks in and it takes off like a rocket. Now the thing is that I don't understand is that it gets up to 100mph and that's it. It acts like it's not getting enough gas or something. The car is an 86Turbo wagon with everything stock except a boost controller which is set at 11psi. Maybe i'm just expecting to much out of this little car. Also will higher elevation make my car slower. I tested at approximately 5500ft. Car has 111K on it and runs great.

looks like a pain the butt project. How does everyone deal with everything in the way like the power steering pump and stuff. I thought I might have to remove the radiator and see what I can do from down underneath.

I'm down here in Wyoming so it might be a possibility for me as well.

anybody know right off hand what size that hose is? Or is a special order hose.

OK here's the deal I noticed I was leaking coolant underneath the thermostat housing. Found the leak and cut off the part that was leaking and reattached. Now it's almost to short. The other end attaches somewhere up under the intake manifold. Looks like it's gonna be a PITA to change. Anybody done this and have any ideas I'd appreciate it? I'm not sure how much longer this temporary fix will be that I have.

What's a good route to go for getting an intercooler without alot of custom work? Also what's the cheapest way? I'm not looking for a hotrod just something a little more fun for on the street. I"m trying to compensate for losing my 93 Bonneville SSEi supercharged.lol

The car is an 86 GL-10 Turbo and i've already figured out the fuel cutoff.

Just ordered a manual boost controller and was thinking about running it at around 10 to 12psi. The rest of the motor is stock until i finish building my 2.5 inch exhaust. Was wondering how much of a horsepower increase I'll see with the increased boost and what kinds of problems i'll run into with that much boost.

111,000K on my 86 GL-10 turbo wagon. Gets between 19-25 depending on how heavy the foot is.

Ha since I live in Wyoming I see lots of cold and dust so maybe I will be changing that belt after all. Just hope it makes it through the winter.

since we're on the subject of timing belt replacement what's the longest anyone has seen a belt go before being replaced. My 86 Turbo GL-10 has 110K on it and i'm assuming it's been replaced but not for sure so I'm just wondering if it's gonna go before long or maybe it will last another 40K.

anybody?

BTW the car is an 86 Gl-10 Turbo wagon

I know this has been mentioned before but I didn't feel like going through old threads. I just found out that my exhaust has a hole in it right after the front catalytic convertor so I decided i'm going to redo the whole exhaust for a nice sound and performance. I'm going to be using new exhaust all the way and i'm going to use one cat where the second one now is. My question is what size of piping should I use as the motor is stock and the only thing I might modify in the future is the intake. I was thinking about going to 2.25 all the way with a high flow cat. Also what muffler would be best for performance. Was thinking about maybe using a glasspack but wanted to see what everyone else's opinions are?

I know we've done the most miles but who has the least miles. I just bought an 86 GL-10 turbo wagon that has 109K on it. I'm the second owner and I love this car to death.

Ok here's the deal. Just bought a 86 Subaru GL-10 Turbo wagon. The car is awesome. Only has 107K on it. But I have a slight problem. When locking the doors only the 2 on the drivers side work. The passenger side work if locked by hand. What's the deal. I'm new to this forum and subaru's. Help me out if you can. BTW I got my subaru by trading a 93 Bonneville SSEi straight across. See now you know i'm nuts and I'm trying my best to deal with these crazy gas prices. Well enough rambling and just wanted to say hi and tell everyone what a great forum this is.