bcmenten

I know I am new, but please help me with the wiring for this changeover from carb to spfi.....any help would be appreciated so very much.

how did you change over the wiring. I'm doing this swap right now and have everything done except the wiring, so any advice???? Please help

I swithced the block and manifold, I have had a problem with my grounds and that seems cleared-up. For some reason my fuel pump stopped working? I got a new disty cap and rotor and new plugs. I have 24 to 25 volts coming out my secondary on the coil and that is grounded and the secondary to case has a resistance of infinity, so the coil should be good. I still have no spark I forgot to check the four lines to the disty, I'll go do that.

I have put a 1992 EA82 SPFI into a 1985 EA82 Hitachi carb and am trying to keep the SPFI everything is working but I have no spark. I also don't have any action going into the coil. I swear that it alsmost fired once but that was it. I have juice at the alternator and eveything else works (starter, headlights, dash, wipers, etc.) I just can't get any spark. I have the wiring harness from the SPFI and have been trying to intergrate it. Any suggestions?