jbecker

I have a 91 loyale wagon non turbo. And for some reason the coil/ingnition fuse keeps blowing. I put in a new fuse and can drive for a mile then it will blow again, i have no idea what to do, Any help will be greatly appreciated Thanks alot, Jason

ok thanks

The information panel on the dash what does the "stop lamp" mean. I have a 88 gl ea82 Thanks jason

i guess i need to invest in a boost gauge. I will let you know how things turn out.

I came up with no luck on how to fix it besides the ATF trick. But my noise started as soon as i got my motor back together so it must be some thing i did. Any suggestions on what i should do to fix this. Thanks Jason

ok well i reconnected all of the vacuum lines. I had a few not plugged in. I went for another test drive and it still does the same thing but the intake piece does not blow off any more because i tightened real good. Once i hit 3k rpm now the car just takes off, it is fast and i know that something is not right. Thanks Jason:banana:

Where exactly does that vacuum line from the wastegate go too, im trying to figure that out.

I tightened it up real good and it works now but it seems like my turbo is putting out way to much boost. Because i have never seen a soob go this fast before. Thanks Jason

I have a 87 gl with a ea82 turbo under the hood and when i get to about 3 grand the turbo really kicks in and goes for a second and then my intake thing that says "4wd turbo" the silver thing blows off above the throttle body. Then my car shuts down and i have to put it back on and this process repeats if i hit over 3k RPMs. Anything you guys think of that would cause this to do this. Thanks alot Jason

I just finished putting back together my 87 ea82t and when i start it it runs fine but the passenger valve lifters are making quite a bit of noise. Wll they stop by them selves or do i need to do anything that a might of did wrong when i put the motor back together. Thanks Jason

I know someone that is towing 2 snow mobiles with his 87 gl ea82. Its about 1500 pounds. Is that too much weight for a soob. The hitch he has has 4 bolts that go into the bumper and 4 that go into the bottom of the cargo area in the trunk. Just curious if that is a good idea or if its fine. Thanks Jason

ok thanks guys

My heads off my ea82 turbo are both cracked between the valves and exhaust ports. Can i get the cracks in the exhaust ports welded up and not worry about the other cracks. Who would be able to weld those. Thanks Jason

Thanks for all of your help. I will work on her tonight.

look for a gl wagon (85-89). Most of these gl wagons have the dual range tranny that you can switch from 2wd to 4wd high and 4wd low. They are out there.