DJtheGOD

I have no idea what brand it is came with the car,it is electric,seals really well,been on about 3 months

Ok here goes Look here http://picasaweb.google.com/Busrsq/MySubaruRX11 and You will see my new exhaust and muffler and it also has a LOUD quiet button on dash that operates a butterfly in the exhaust to make it quieter and has more back pressure(only use it in cities), Also the short shifter I took out of my Rally spec car has clearance issues so I will need to rethink it. Next will be a custom intake I am building then Intercooler,Then MORE BBBOOOSSSSTTTT heheheeh then scare WRX's. I also have 2 spare engines one of which is fully forged internals...

Yeah and now I have it and it all good with a new clutch and Exhaust and soon to be new intake pics are here http://picasaweb.google.com/Busrsq/MySubaruRX11

Man That is a sweet ride I got both my '87 coupes of Trade me as well Shame you in the south island would love to see it Anyways heres another wee place that us old school Subaru owners hang out and it based in NZ http://clubsub.org.nz/forums/index.php?board=49.0

Ok guys heres a question for you,I have a MINT 87 FWD leone/Omega coupe body and instead of putting the RX running gear in it,I also have an almost complete 93 impreza running gear(less engine some prick stole it outta my shed) do we know if the impreza bits will bolt into the coupe (gonna get a 2" lift at the same time)

I am going to run 14mm copper pipe for the long runs and then rubber heater hose for joiners,it will look purty....

Yup that is where it is on a Legacy,I to have just brought a WAIC for my RX 11 and have every thing I need except time and some stainless pipes was thinking of putting pump under bonnet in front of air cleaner

The stockies on my leone The 14" that are going to go on once they are painted(black) And another set of 13's that will be painted black and be run as dirt rims

As has been mentioned it probably is tires,and it not just the same size tires either they all have to be from the same manufacturer a 185/70 13 from dunlop will be different than a 185/70 13 from goodyear also when disconnecting try blipping the throttle

Yeah I hear you about the alloys i should be able to help cause I found another set yesterday that makes 3 sets of 13 and one set of 14, I should have CV's here that will fit I have some from a FWD will they fit also got later models front and back. email me at busrsq@gmail.com Oh and wot apprenticeship you doing

Well other than the 6 full Subarus and the other 20 that I have stripped what other vehicles you fellas run me I have a Toyota Landcruiser 70 series Troopy,two Lada Niva's(why I dont need an offroad Subaru) Toyota Hiace 4wd Van(missus's work Van) and an Isuzu Trooper...

and a nice Leone rally car http://www.trademe.co.nz/Browse/Listing.aspx?id=109524872

Which is why the 14's are probably going on for most of the time,Maybe put some Snow and Ice tires on the 13's for when I need the extr traction

Here's one on TRADEME in NZ http://www.trademe.co.nz/Browse/Listing.aspx?id=110197717

hey all now I have a choice of three rims for my RX2 The choices are Multispoke 13",8 spoke 14" or the Stock 13"

[/url] If you have any probs sourcing one in OZ i may be able to get one from either a wreckers here in NZ or even from Subaru themselves as I believe these were imported new to nz

will have a look in my hand book but could it simply be for the marker lights which are called position lights in some countries;)

How much you sell it for,did you sell it to Levin, it pretty good nick and lastly did you put new engine in it,oh and do you have a left rear light cluster,and the boost guage is all good,I am in the process of fitting a BOV and a controller,and a set of 14" alloys,do you need any bits for any of your cars,I got various cars and bits here(ea81 engine in good nick)

Yeah I have pics of it I dont really need any RX coupe panels as it is pretty straight was just toying with the idea pictures are at http://picasaweb.google.co.uk/Busrsq/MySubaruRX11 These are as I picked it up last weekend TRADEME special will post pics as I do things to it

Sweet as I do know where there is a XT thats been rolled might go and remove some panels and try them on my parts car just to see

This I already know I will have to source a front end of a XT and see if they bolt on, I mean the bolt on bits like guards,bonnet(hood for those of u from the US) and lights and grill.

Hi y'all Well after lookin at some side pics of both Rx coupes and the XT coupe if you remove the bolt on front ends and the rear panels is the rest the same(thinking of finding the bolt on bits for my RX)

Hi all long time no post,well after a long search I have finally found a Leone/Omega RX that I am happy with,It is a 1987 Leone RX11 Coupe and other than a dodgy clutch and a wee bit of rust it is in good nick,which is lucky because my other coupe is full of rust.. Cheers DJ I don't suffer from insanity,I enjoy every moment of it

Yup thats the plan and "engineering" isnt really that challenging as that is my trade,the difference in the 4th gear gear ratio over or below 1:1 will not be a problem as it will not be driven very far on sealed roads it will be towed to and from the "fUN" places.which makes me think a manual gear train would be better so I can tow it behind the cruiser on an A Frame... more to think about...

Yeah I know 4th aint quite 1:1 but it close enuff for wot I want to do.. Funny you should mention a Lada that is another of my many project vehicles(needs a clutch at the moment) and your exactly right about the looks I am guessing that it will go pretty good off road but it is gonna LOOK like it will go anywhere and that is just as important as it actually going anywhere... DILLIGAF DJ