doobieryan
-
Posts
198 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Store
Posts posted by doobieryan
-
-
It's actually a buddy's car. I'll be doing the work tho. I'll talk to him about the conditioner stuff.
I know on the ea81 guys recommend the fel-pro perma-torque gaskets...
It's a 2.5 btw
-
What's the best gasket kit and bolt kit to get?
Should I pull the motor to do it?
And what else should I replace while I'm in there?
Thanks, Ryan
-
Gonna reinstall my flywheel and clutch tomorrow, wondering what the torque specs are.
Thanks,
Ryan
-
does anyone know the threads on the flywheel bolts?
-
I already have the new bearing, just couldn't figure out how to get the old one out. Lol. But thanks, that's helpful
Is there anything else I should know? I heard something about rtv on the flywheel bolts, but that might be just ea81s
-
I just bought a 1980 brat last week that needed a clutch. I pulled the motor and clutch and noticed my flywheel teeth were pretty marred up, so I ordered a new one. Like an idiot when I took the old one off, I didn't pay attention to where the timing marks went...
Can anyone help me figure out how to get it properly aligned?
Also, how do you get the pilot bearing out of the rear main seal?
Thanks,
Ryan
-
I wish they'd put t-tops in everything like the brat!
That would be awesome! I love t tops
-
hi, the factory parts book shows different numbers depending on if a 4-dr , or a wagon, not sure they interchange or not. they look alike but may not be exact swap. BTW the oem is over $800.
I figured it was about that much. And it's a wagon. They probably do interchange, but wouldn't want to take the chance anyway. Lol
-
There's one in Tacoma Wa at the pick n pull if someone can snag it for you
Might just have to go grab it, Prolly be cheaper than getting a new one if I even could...
-
You might want to specify whether it is an EA81 or EA82 type subaru.
It's an ea82 vehicle
-
My dad has a gl 10 and the sunroof flew out of it. Anyone have one they're parting out?
-
I really wanted it. Drove great, but they wouldn't give me enough for trade in on my truck, so not this time...
And I knew about the older 2.5s having problems, but for some reason it seems like I remember the turbo ones not having all the issues. Maybe not. But that's why I asked. Don't know a whole lot about the newer ones. Haven't kept up since I got rid of my subie a few years ago.
-
It has 30k really clean car. Are these known for being good cars? I'm used to the older subies but we need a new family friendly rig.
Thanks
-
1
-
-
you wereright, they are 13s, i was given some misinformation.
-
13's??? perhaps.
nope, theyre stock subaru 15 inch rims. really nice car and everything works, except when it gets to normal operating temp it dies. any ideas what that may be?
-
correct me if im wrong, but since its already wired up for an mpfi motor wouldn't that make an ej swap a lot easier? just a thought, came across a nice one with the stock gold 15 inch rims and everything, its soooo nice...except for the ea82t.
Thanks,
Ryan
-
its worth it to me to keep the car cause it runs good and its a cheap commuter, if i found something else that was good i might get it, but for now im just gonna throw a new tranny in it...thats easy...especially when i have access to a hoist:banana:
-
k, sounds like im just gonna go with another auto. im very confident i could get er done in a weekend, and i would love a manual tranny, but i dont feel like puttin that much work into it. besides, my real project is my truck im doing a chassis swap on. Im just looking to spend a few hours on this car, and i think to avoid the torque converter issues im just gonna leave the tc from the donor in the tranny. prolly grab me some cv axles too cause mine are clickin pretty bad. ill probably go to the junk yard next weekend and see what they got.
-
would my cruse control still work right? its a commuter so cruise is nice. lol
-
haha. It has been too hot here, its always just like another neutral. If it were winter i might get a little bit out of it lol. maybe i will do a 5 speed swap. what all would that require? i can do all the work, im pretty good with a wrench, i just dont wanna miss anything off the donor car(s) cause the pull and save is 100 miles away and the car needs to be runnin the next day.
-
ok thanks guys, thats pretty much what i was looking for. ill just look on the tag on the dif of the junk car and make sure its the same ratio as mine. not looking to spend $900. lol
-
its just a commuter clunker. 55 bucks for a whole tranny is probably better than what the clutch packs cost. im not gonna take the time for an mt swap.
-
93 legacy ej22 with a 4eat. reverse stopped working last weekend. tranny fluid is fine, doesnt smell burnt or anything. has 220,000 miles. all forward gears work just fine. i was wondering if this is a common issue, maybe just a vacuum line or something?? im new to the new gen. im prolly gonna go to pull and save this weekend and get another tranny if you guys think its toast.
Thanks,
Ryan
-
If you get a conversion plate. SJR makes one
2004 outback blown head gasket
in 1990 to Present Legacy, Impreza, Outback, Forester, Baja, WRX&WrxSTI, SVX
Posted
He doesn't know much about cars at all. I talked to him yesterday and he said he put a different kind of head sealant in the coolant and it hasn't over-heated in a while, so I'm just gonna go ahead and do the gasket. Who knows what that stuff will do to his engine...