Nico

HSD coil overs gc8 up front, rear from what I see like suberdave has done legacy or new age impreza which is the same for the rear I have them on order so they will be in soon.

LOL i know soon it will be in haha ! im only one man band over here .. still on the way is the clutch coil overs and my new vi-pec and wiring harness. rims are getting powder coated then tires to come in im all most ready to strip it down

SUBARU TECNICO INTERNATIONAL EJ22T built bottom end, JDM EJ207 STi Version 8 Type RA heads all oem test fit my full race twin scroll kit

omg i have one of those intercoolers from along time ago, also i kind of want to keep AC in my car, i was going to make custom lines. i think im just going to mount it right under the front bumper on a angle nice thick one. its all most time i order one up so will see what i come up with SUBARU TECNICO INTERNATIONAL EJ22T built bottom end, JDM EJ207 STi Version 8 Type RA heads all oem ! one of the rarest parts to find and i found both of them some how lol... JDM oil coolers with t stat built in factory nothing can beat these and they are for sale

SOLD SOLD

SOLD SOLD

started stripping for what i need

welcome home STi version 8 spec c lol

Thanks ! Lol ya should be crazy when all done, I hope the brakes do the job in stoping this car

So I went and picked up a Jdm spec c version 8 (maybe type RA) motor swap Ej207DW7ER TY856WB6JA for heads and tranny diff and what ever else I need to twist my leone in to pretzel lol Also I was driving to see the boys at Nvauto and I seen a gc impreza on top of another car scrap yard ! so I found the rims I wanted for a steal 250. So I sent them out to the sand blasters to get ready for the powder coating. I'm thinking world rally blue color for the rims

I don't know where I can put a intercooler in this car 1986 oil filter

Little powder coat action Got my 2006 wrx backing plates all fixed up so they can fit on the hub the xt6 hubs as instructed from Suberdave !

lol glad you like it man ! im going to make a h brace like the other subarus have and fender brace, the rear in these cars look very tuff no room for anything. ya my car only has 28,000km and is all stock so its really a new car, it handles good just not great yet. cant wait to see your ride when its done 350hp should be nice in these cars. with 8" tires should handle like a dream looking forward to see your build

with +600whp on race gas, awd is a must and a STi 6mt

Thanks Sam ! I got lucky I guess finding such a perfect Subaru so I could not resist on doing this to it. I don't know how this car will handle after I'm done with it. as of now in stock form it's very very loose. From a impreza to legacy the legacy feels smoother with its longer wheel base and weight. I'm putting coil overs and some white line products on the gl-10. I have a couple ideas on stiffing the car up. If that does not work I'll put a real cage in it

LOL well i sold my legacy turbo as is so im just going to buy new stuff like a STi ver 8 for its heads, wires, 6MT, then swap the built ej22t block i built. so parts list is VER 8 Sti complete Vi-PEC V88 EXEDY ?? dont know yet maybe multi plate to hold the power SPARCO seats: maybe, kind of want it stock but need support lol Rims: gc8 and volk jdm if i can find them Tire's : RACE SLICK lol for evey day haha !! new rotor pads that wont stop this much power to weight lol my rear control arms, that me and my dad had to make a tool becuase no one on the plant has one lol little thermal coat so then i can wrap them got some tubes to make my wastegate pipes longer away from everything

new turbo set up full race twin scroll

so got a little oem new parts in today xt6 wheel bearings, xt6 steering tie rod, mustache bar bushings, and new diff support. also have 2006 wrx 2pot rear backing plates, but i sent them out to a friend's machine shop to make a ring for the centering ring this saturday i should have my xt6 rear control arms in, the ones i took of the xt6 i cant get bearings out the locking nut is rusted shut

TheLoyale: hehe thanks !! quick snap on my iphone 4s. natext6: i scraped it only took the parts i needed for awd.

^^ they look nice Well got half the brakes sorted out for the project

^^ LOL yep all ways need some old school rock with my old school car !! a little eye candy from Jon at full race coming soon !!

(ECU adaptation) so what we have hear is the female plugs i need from a stock 1986 turbo ecu that i destroyed for these plugs then when Dov @ NVauto gets this in for me, i can connect the Vi-PEC 044 plug in board to my gl-10 from my legacy turbo.

i did order from subaru then my cuz said no it to old they will not bring it in well if you want i can sell you all four and with brand new toyo tires i got on them ! PM me for more info. build is moving along cusco motor tranny mnt ARP head studs, Cam & Crank sensor new oem done

^^ yes i'm back and i tried to sell it to subaru america or canada no go with those to @E#@!$# !! LOL.... but it looks like you got a nice build going on all most like mine. sorry guys been busy with my legacy so today i took my little gl-10 out of storage i just love this car lol no pics yet the weather is crappy but ill take some soon. so i started on the motor because i will be ordering some new old school parts from the dealer and it takes for ever ! cars to old lol. so i found some good stuff, whiteline makes these parts W81061 radius rod gl-10 W12249 steering rack gl-10 W51458 control arm bush xt6 also will get new sway bar bushings from whitline also. and i found the part number for the trunk wing the little one on the back from the factory i got that coming in also. x9601ga001 should look like this