Jump to content
Ultimate Subaru Message Board

Karhu

Members
  • Posts

    26
  • Joined

  • Last visited

Posts posted by Karhu

  1. Are you sure it didn't say "6 JAPAN"? Any idea what the combustion chamber looks like?

    Absolutely sure that´s 8: post-52247-0-82877300-1425735144_thumb.jpg

    I´m going to resealing that engine, and i will take some photos of combustion chambers when heads are taken off.

     

    You see there is some coolant in wrong place. I think intake manifold gaskets are gone, but there was some other oil/coolant leaks so i took engine up.

    I am interested of those different head designs, because i've planned to build "high performance EA82T" with using best parts from its era. So, in future, I intend to disassemble three engines: MPFI N/A, Turbo with "spider" intake and one other turbo with Gen3 heads.  In this connection, i would compare those EDM heads and share results here.

  2. Wondering trip computer installation. because here the radio frame is different than the USDM, I need a new frame. Now it looks like this:

    post-52247-0-78188300-1425396651_thumb.jpg

     

    I need something like this (And that kind of original radio and cassette deck, i like to use cassettes) B)

    post-52247-0-27597400-1425396900_thumb.jpg

     

    OR, The newer design control panel, if it suits:

    post-52247-0-10561500-1425397062_thumb.jpg

     

    I still need the fuel level sender. I am interested also other GL-10 stuff like adjustable intermittent wipers or cruise control, please send PM if someone have one or more of those. "More stuff with one shipping" ;)

  3. OK, i need first check the part number, and if it's correct, i will try to buy from him.

    I'm not sure of that sender. My catalog says that correct part numbers could be

    85111GA153 or 85111GA215

    i made some searches and one result says that  85111GA153 is for analog cluster:

    http://www.buysubarupartsnow.com/subaru/gl-10/85111ga153/?year=1989&trim=turbo&engine=1-8l-h4-gas&group=air-and-fuel-delivery&subgroup=fuel-pumps-and-related-components&part_name=fuel-tank-sending-unit

     

    i also search with ebay seller's part number:

    http://www.buysubarupartsnow.com/oe-subaru/85111ga145?search_str=85111GA145

    Note: price is same?

     

    But this one is little more expensive:

    http://www.buysubarupartsnow.com/oe-subaru/85111ga215?search_str=85111GA213

     

    I have no idea, which is correct part for digital dash... :(

  4. My last visit was quickly, and with my poor language skills it's not possible to post long answers without translation help. :mellow:

    My project car really needs whole digidash system, because there in Finland, those cars came with very poor options, and that's why i want to do upgrades now.
    My car is '87 3-door coupe, but i want use 85-86 model's dash because it looks better.

    Fuel sender is only thing that missing of czny's stuff.

    I think model year it's not so important with fuel senders, main thing is that it's pulled from digidash vehicle. Bratman18, if you can sell fuel sender, i'm interested. If you can deliver it via czny, it should be awesome. Only one shipping for all parts should be ideal way get this stuff, i don't want pay twice shipments or customs.

    Bratman18, i'd like to see some some pictures from inside of your car. Specially, how trip computer buttons are located in your'88 car. :)

  5. Amazing! Thank you for checking functions. :)
    I see that the turbo indicator missing?
    I guess this cluster is from the N/A vehicle without height control? But it is not so important thing.

     

    I don't see Celsius temperature indicator on the display, where all segments are displayed, but the most important thing for me, is that km/h button.

     

    czny, email sent to you.

  6. Thank you guys!

     

    It would be best to get all stuff from GL-10 Turbo model, because my car have turbo engine.

     

    So, list of parts that I need: (please add if something missing)

     

    -Whole dashboard harness (or all parts of car harness which are different)

    -Instrument cluster

    -Trip computer buttons, unit and display

    -Fuel level sender

    -Outside temperature sender

    -Radio frame if it's different when the computer buttons are installed. (extra question: can i use normal one-DIN unit with this setup, i mean is there enough room in the depth direction?)

     

    I have good wiring diagrams already.

     

    One new question: Whether there are orange version dash, who says "full time 4wd" in car monitor?

     
    I'm going to install the full time D/R gearbox in it.
  7. First test drive with summer tires and first snow became. The next day was a vehicle inspection whose passed without notices.
     12898965.t.jpg 12898966.t.jpg

    Hub caps painted with body color, for winter wheels
    12899034.t.jpg 12899035.t.jpg

    And this is what it looks like now:
     12899058.t.jpg 12899059.t.jpg

                        
                            
    _________________

  8. Other repairs...
    12898886.t.jpg 12898887.t.jpg

    Painted with rust-stop primer. Rear crossmember came from my other parts car, painted it and most of the undercar parts too, before reinstalling.
    12898889.t.jpg 12898890.t.jpg 12898891.t.jpg 12898892.t.jpg

    And more rust repairs... Remember that this was my first bigger car renovation.
    12898907.t.jpg 12898908.t.jpg 12898909.t.jpg 12898910.t.jpg

    This one area came from gray XT...
    12898911.t.jpg 12898912.t.jpg
    First layer of underbody coating and reconditioned parts installed back on the places.
    12898922.t.jpg 12898923.t.jpg 12898924.t.jpg 12898925.t.jpg

    Front fenders was pretty rusted:
    12898926.t.jpg 12898927.t.jpg 12898928.t.jpg

     

    During this project, my welding skills were improved. :D

  9. I know Subaruxt.com, but if it's not prohibited, i'll show car project here. I have not yet signed up to the XT forum.

    After seeing the damages, I became depressed. But I decided to finish the job and put the car back on the road!

    The following pictures show step by step how I fixed one of the worst rusted places, driver's side floor.

    Here it Starts. Cutted off mostly of damaged areas.
    12898760.t.jpg 12898761.t.jpg 12898762.t.jpg

    New frame...
    12898763.t.jpg


    12898764.t.jpg 12898765.t.jpg 12898791.t.jpg

    Piece by piece...
    12898792.t.jpg 12898793.t.jpg

    This was little bit difficult to produce and weld it on place.
    12898794.t.jpg 12898795.t.jpg 12898796.t.jpg

    Almost ready
    12898800.t.jpg

  10. I'll show you some pictures of the renovation.
    Click for larger pictures.

    At morning of the starting date:


    12511710.t.jpg

    At evening:

    12511711.t.jpg 12511712.t.jpg 12511713.t.jpg

    My wife helped me to remove the parts.

    The gray XT is for parts. I bought a third one during the project:

    (Also for parts, but it's reparable)


    12550164.t.jpg 12550163.t.jpg

    Car raised on the grill:

    12554434.t.jpg 12554433.t.jpg 12554436.t.jpg 12554435.t.jpg

    Found "some" rust...

    12556699.t.jpg 12556696.t.jpg 12556695.t.jpg 12556697.t.jpg 12556698.t.jpg

     

     

    Edit: I tried to add more pictures, but they disappeared. I'll try again later. :)

    • Like 1
  11. The switch to change only changes the MPH to kph, not the odometer (which is still a dial), nor the twin "trip memters".

    My Jap spec cluster didn't have this button. I think it's only for the north american market because the US in the MPH & Canada has kph

     

    I'm guessing that there is something built into the circuitry to determine what reading they show.

     

    I was thinking the same thing. I believe that it has been easier to produce only one type of dashboard, which can be easily changed to suit the different market areas.

     

    In that case, i can buy parts anywhere in the world. But of course getting the metric version is my priority.

  12. Can someone post more detailed pictures of the trip computer buttons?
    Outdoor temperature indicator is a useful accessory here in Finland. I understand that the Orange version shows outdoor temperature in the instrument cluster, and the Green displayed it on the trip computer display?

    I know that other functions aren't so useful, but it's 80's system and i want to get it in my project. :D

  13. This is important to know, how the trip computer buttons are located with old/new desingn. Here the radio mountings are different than US models, so there is no space in right next to radio, for buttons. I need to know, can i use new version buttons (located under to radio) with old trip computer? I think they have little bit different functions?
    I've seen pictures of orange dash, where is button to change km/miles. But can they show outside temp in celcius?

     

    I found a few pictures using google:

    Orange dash with t.c. buttons next to radio:
    http://4.bp.blogspot.com/-TS3VAIhQGSQ/UFOqQlMx5eI/AAAAAAAAAlY/LinHwI-AvbM/s1600/1985SubaruGL4wdTurbo75.JPG

    Green dash with buttons under radio:
    http://img.photobucket.com/albums/v344/gotboost/PB020459.jpg

    And green dash with "old generation" buttons?:
    http://www.curbsideclassic.com/wp-content/uploads/2012/03/JDM-Interior.jpg
    (JDM-car)

     

    I know that is not a plug and play swap, but target car is not a daily driver and i am not worried about the potential problems.

  14. I'm interested of digital clusters. Here in Finland they never was sold, and i have seen them only on brochure pictures. My plan is swap analog to digital! I thought that best way could be change the dashboard wiring harness in same time. So, i need the cluster, harness and trip computer stuff, and the fuel level sender from digital dashed car, as i've read about it, Right?

    The early orange version looks better, i think that newer one looks like simplified version.

    One of my cars is a 1987 Subaru Leone Turbo Coupe with part-time 4WD and the project is to make the Leone RX/II replica (never was sold in here) and add some special accessories that Finland has never been available.

     

    Is there always trip computer installed with digidash?

    Sorry for possibly bad english, please notice me if this post was unreadable, i'm new here. :)

×
×
  • Create New...