[93 Loyale wiring diagram please?]

I checked my manual for the resistance value. It stated that it should read between .5 and 2 ohms. So perhaps yours is ok. I still don't understand what the other coil is for unless it is for some sort of feedback signal to the ECU. Again, the injector in my manual only has one pair of wires to it.

 

Another thing my manual mentions I was unaware of is the vehicle specification code. My manual only shows codes up to four. A fifth one may have been added later. This code will basically come on when there are no other codes in memory.

Thanks for the ohm info. Most injectors don't read that low but your info confirms my 93 injector is OK. Also my ECU flashes 5 times when there are no other codes.

roy---------This thread continues at:http://www.ultimatesubaru.org/forum/showthread.php?t=27564

[93 Loyale wiring diagram please?]

http://www.main.experiencetherave.com:8080/subaru_manual_scans/

The above link (courtesy of Moderator Legacy777) is for a variety of FSM including electrical for 92. Might be of help. I wish these type documents could be gathered together and made available more obviously in Repair and Mods or under their own heading! Santa, are you still around?

Thanks for the link. Info was interesting and might become useful. Unfortunately,actual info can't be posted to a site. But guys like you get it around. For that you get my first post on this site. roy