VorpalBunny

Muffler bearings...............

I just checked mine on my '90 Loyale and found to have # 11, 13, 14, 34, and 35! Heck, it has 205k on it so I'm gonna drive it until it dies!

Possibly the brake pad separated from the caliper. This happened on my '01 OB. It did not chirp or squeek until I drove about 3-5 miles and went away when applying the brakes. I took it back to the dealer who could not hear it on a short drive. I told him to get on the freeway and drive it for a while. Sure enough, he heard it ( and fixed it) under warranty.

Just used a can in my 2000 Dodge Caravan with a VERY noisy engine (lifter and injector) today. 1/2 of a can in the oil and the other half in a nearly empty tank of gas. Did 10 miles at 80mph on the freeway with some WOT at times. Let's just say that it purrs like a kitten now. My 1990 Loyale (200k+) was treated last year, but one of the HLA's is still calling out for some more Seafoam. Good stuff.

Just used a can in my 2000 Dodge Caravan with a VERY noisy engine (lifter and injector) today. 1/2 of a can in the oil and the other half in a nearly empty tank of gas. Did 10 miles at 80mph on the freeway with some WOT at times. Let's just say that it purrs like a kitten now. My 1990 Loyale (200k+) was treated last year, but one of the HLA's is still calling out for some more Seafoam. Good stuff.

Every time I hear that comment at work, I tell the suveyor's helpers to get out of the truck and quit bellyaching!

Very good chance it is the idler pulley bearing. When the water pump is starting to go, it sometimes sounds like it is full of rocks or marbles.

Pull and Save is next to Spauldings.

U-Pull Auto Parts at 15910 W. Hwy 2 in Airway Heights (509) 244-5567. Just west of Spokane. Whitey's Wrecking at 4330 E. Francis Ave. 1-800-735-2376 (Deals in hard to find import parts) Spokane (www.whiteyswrecking.com) Spauldings at 2210 N. University and Pull and Save at 10414 E. Knox (509) 921-8000, are your best bet then check out Whitey's. Not sure about U-Pull though.

On I-90, take the Argonne Exit and head north. Then turn east on Montgomery and go about 1/3 mile. There will be signs at the intersection. Been there a couple of times to get parts for the Loyale. If I remember any more yards, I will let you know.

Disconnected both the white and green, now getting a 34 code (EGR solenoid or circuit). I thought these wires had to be connected to get the codes?

Thanks Cougar, My Check Engine light has been on for a while. Just read another thread, so the white and green connectors should be diconnected?

My 1990 Loyale is getting 5 quick flashes for a code. Any ideas?