Im new to the forum so hello. Its been years since I had a subaru and I finally got another. Last 2 had allied lifts and they are obviously gone now. I have looked around and cant see any american manufacturers. Any help would be great.

just Google "SJR lifts" he's a Bord member, in bellingham WA,

Albie from Allied is still around. Look in the vendor's section for Albie's Fab Shop. Still has the lifts and wheels and all that good stuff

Albie from Allied is still around. Look in the vendor's section for Albie's Fab Shop. Still has the lifts and wheels and all that good stuff

 

Ummmm.......probably not, according to this:

 

http://www.ultimatesubaru.org/forum/showpost.php?p=817313&postcount=17

 

Dan

What kind of Subaru do you have? I do lifts for Gen 2's and Gen 3's, and soon to have Gen 1 lifts as well

 

-Bill

What kind of Subaru do you have? I do lifts for Gen 2's and Gen 3's, and soon to have Gen 1 lifts as well

 

-Bill

 

 

I have one of these lift.....87 wagon....needless to say...BEEFY, well put together and affordable.

 

I recommend.

 

-caleb

I too am looking for a lift for a 91 loyale. I'd like to be able to stay with the stock suspension, drivetrain, and avoid fender cutting. mostly because my limited mechanical abilities....after all i'm an electrician. i've looked at the stuff from SJR, and it looks reasonable, but would also like a comparison. would also like to hear feedback on what kind of a job i'm looking at...will my subby be torn apart in the garage for 3 months while i figure out how i got into the mess i'm in, or will i have it back on the road after a long weekend?

I did my lift from BOSS in a few hours. I was by myself, with no help. At that point in my life, I had never had a pair of struts out of a car. It's fairly straightforward. When I did have questions I just called Bill, and he answered them for me. I have a 2" lift and you can run 27" tires with some hammer work in the inner fenderwells if you choose to go that big. I'm staying around the 25.5"-26" range. My lift was the no frills easyiest lift at $100 bucks. I dunno if thats still the going rate. You could PM him and ask. (The Beast I Drive) is his name here.