Ark Posted December 30, 2009 Share Posted December 30, 2009 i curently have done some work on my 1998 subaru impresa 2.2 i took it to the local parts store and put it on the obd reader and it was throwng p0303 code so i proceed to change wires and plug witch seems the most logical thing to do . So i removed the winsheild wiper fulid box and the battery to reach 2 and 4 cyclinders and thats it then i tried to restart the car after and now it will start but as soon as the car goes back to idle it dies and all i have done was change all four plugs and wires . and now the flshers stay on even with the keys out of the ignition so i am wondering if anyone else has this same problem or any solutions, i read some other threads on the code but no one mentioned it not starting after changing the plugs and wires, has any one heard of this? could the light thing be a battery issue, maybe i have to reset the ECU Link to comment Share on other sites More sharing options...
nipper Posted December 30, 2009 Share Posted December 30, 2009 www.cars101.com has the instructions. You set off the factory car alarm thingy i think. It needs to be reset. welcome. nipper Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now