Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

wont start

Featured Replies

hey. have just put a 2nd hand engine in my legacy, but i just cant seem to get it to fire. ECU earth is on, i have fuel at the injectors. i pulled a spark plug for a look and its a bit wet, if that means anything ?? help please

There is insufficient information for a meaningful answer.

 

Can you be more specific? Is it cranking or do you hear nothing when you turn the key? What have you checked so far? Did it ever start before?

  • Author

yeah it used to run, dont know how long it has been sitting for. its cranking over but just wont start. guy told me to check ecu earth, check. got heaps of fuel. whats the next step??

Check for spark and air flow. Then compression test.

While having a friend crank the car, pull the wire out of the coil but close and check for the arching of electricity. Do it for each wire. If there is no arching then you are lacking spark. You'll then change the coil pack, tho the problem might lay in the igniter.

  • Author

i pulled out the coil, cranked it with coil from new engine and coil from my old engine but nearly no spark. are you suppose to use the whole coil or just the wire??

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.