wrongturninwv Posted January 5, 2011 Share Posted January 5, 2011 2001 Outback 3.0. I have a dry day where I can fix this fog light. Do I have to take the whole light out just to change the bulb ?? I see 2, 10mm bolts above. Took off plastic cover. Does the bulb come out of the back or does the glass come off the front ??? thanks Link to comment Share on other sites More sharing options...
idosubaru Posted January 5, 2011 Share Posted January 5, 2011 i replaced a 2003 legacy GT bulb a couple months ago and it was accessible from behind the bumper. I would assume the OBW is the same. Funny thing is I've replaced them on my O2 H6 OBW but can't remember since I just swapped the entire assembly, not just the bulb. *Got your PM, I did look but didn't find that amp yet, though I'm positive I have it as I just bought it a couple months ago. Link to comment Share on other sites More sharing options...
wrongturninwv Posted January 6, 2011 Author Share Posted January 6, 2011 Thanks Gary, cant feel a thing from behind the light to get at the bulb,may just have to pull whole thing out. Link to comment Share on other sites More sharing options...
idosubaru Posted January 6, 2011 Share Posted January 6, 2011 they are different bumpers so maybe it's different or my memory is that bad. if you follow the wire and get nothing or there's no access then i guess it is what it is. i've replaced the front fogs on my mine and it's as you say - some 10mm bolts holding the bracket in place. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now